CarLock Tag 3.0 User Guide: Setup, Pairing, and Usage

The CarLock Tag 3.0 is the latest generation of our Bluetooth proximity Tag, designed to work seamlessly with your CarLock security system. This compact accessory makes everyday vehicle protection even more convenient by automatically arming and disarming your CarLock device based on the Tag’s proximity to the vehicle—no manual action required.

With improved performance and durability, the Tag 3.0 offers a simple and hassle-free way to manage your vehicle’s security. Pairing the Tag with the CarLock app takes only a few minutes, and this guide will walk you through the entire setup process step by step. Tag 3.0 can be used with both, iOS and Android phones.

*The CarLock Tag 3.0 is currently available exclusively on Amazon UK. We will notify our customers by email as soon as the Tag 3.0 becomes available in additional countries and regions.

If you are using an older CarLock Tag model, please refer to the appropriate setup instructions for your version. Tag 2.0 pairing manual can be found here, and Tag 1.0 pairing manual can be found here.

Before You Begin

Before pairing your CarLock Tag 3.0, make sure that:

• Your CarLock account has been activated.
• Your CarLock device is properly installed in your vehicle.
• The latest version of the CarLock app is installed on your smartphone.

If you have not yet activated your CarLock device, follow the installation guide included in the package. For additional assistance with activation or setup, visit our Help Center at carlock.co/help.

Get Started

Once your CarLock system is active and ready to use, you can pair your Tag 3.0 directly through the CarLock app. Follow the instructions below to complete the setup and start enjoying automatic security control for your vehicle.

(CarLock Tag works with CarLock devices purchased after January 1. 2018. To confirm whether your CarLock device supports the use of Tags, please check the SmartLock tab in your CarLock app. If Tags are not supported, you will see a warning message. Contact our support team that will help you with that issue: contact here)

Setting up the CarLock Tag

NOTE: Before starting the procedure, make sure to enable Bluetooth and the location permission! 

1. Charge the Tag’s battery using a standard USB-C cable — the same connector used by most modern phones and electronics. Simply plug it in for about one hour, and the Tag is fully charged.

2. Open the CarLock app on your phone, go to the “Dashboard”

3. Navigate to the “SmartLock” tab — the third tab at the bottom

4. Tap on the “Manage” button and on the next screen enable the CarLock Tag functionality by tapping on the toggle switch in the upper right corner of your phone screen (if it is on ‘’OFF’’).

5. Tap Add Tag and scan the QR code on your Tag. Alternatively, tap Detect Nearby Devices at the bottom of the screen to search for Tags in range. Once the QR code has been scanned or your Tag has been detected, tap Yes to confirm. Next, assign a name to your Tag and follow the on-screen instructions to complete the Tag test and finish the setup process.

6. You can rename the Tag anytime by tapping on the ‘’manage’’ button.

7. If your CarLock device needs to be updated to work with Tag, this message will be present.

The CarLock device will start updating automatically after you add the CarLock Tag by the previously mentioned process. It might take a few days. After that, you can start using your Tag.

Congratulations! You have successfully paired your CarLock Tag with the CarLock app. Now you just need to place the CarLock Tag somewhere to have it with you all the time. We recommend placing it on your car keys.

This ensures that the CarLock device always detects the Tag when you are approaching your car. When the CarLock device registers the Tag, it will stop monitoring your car. Conversely, when the CarLock device loses the connection with Tag, it will start monitoring your car.

Check the following blog post for more info on which security notifications are enabled or disabled by using CarLock Tag: https://www.carlock.co/blog/en/2016/12/06/carlock-tip-1-work-sleep-without-worry/