CarLock Vibration Sensor Troubleshooting Guide
You can check the next link for more information about pairing the Vibration sensor: https://www.carlock.co/blog/en/2023/10/16/how-to-pair-and-turn-on-the-vibration-sensor/. There is a small button on the inside of the Vibration sensor. Here's how this power button functions:
- Press the button and keep holding for 1 second. The blue LED lights up for 5 seconds and then turns off. The sensor is enabled and working.
- Press the button and keep holding for 1 second. The blue LED blinks 5 times. The sensor is turned off.
Unfortunately, the LED light is poorly visible as it is on the other side of the PCB. Make sure you're in the darker room when you switch on/off the Vibration sensor to see the blue light better. For the Vibration sensor to work, you need to make sure:
- The sensor is on; if you pull the plastic tab from under the battery, you can also make sure the sensor is ON by pressing the button (Press the button and keep holding for 1 second. The blue LED lights up for 5 seconds and then turns off. The sensor is enabled and working)
- The sensor is in the Bluetooth range of your CarLock device (around 6 meters)
- The security is locked in the CarLock app (the 'lock' button turns RED)
